
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X60UT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work in tight spaces. The stainless-steel barrel and Ø12 mm piston rod resist mild corrosion and washdown, outperforming painted alternatives in damp environments. It breathes through a 1/4 inch port and relies on fixed TPU bumper pads to decelerate the stroke end.
Because this 60 mm stroke unit lacks a magnet, it cannot accept position sensors; add an -S variant if you need CMSG or DMSG switches. For practical sizing, plan for a safe working load of roughly 241 N rather than the theoretical maximum. In vertical lifts, that translates to hoisting about 20.5 kg safely with a 2:1 margin. Order code MI32X60UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60UT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a heavy routing flap on a packaging conveyor, using the 402.2 N push force to redirect filled cartons reliably.
Drives a short 60 mm stroke marking pin into aluminium extrusions, where the fixed TPU bumpers absorb the end-of-stroke impact.
Deploys a 90-degree U-cover mounted stop arm to halt pallets on a gravity roller track, lifting roughly 20.5 kg of gate mechanism.
Sizing this 32 mm bore against its neighbours shows a clear step up from the 25 mm class (245.3 N push at 0.5 MPa) and a slight drop down from the 40 mm class (628.3 N push). The 60 mm stroke keeps the rod compact, minimizing side-load bending risks. Its U-type back cover provides a 90-degree mounting orientation for tight machine frames.
Remember that a standard cylinder drifts when air is lost or a valve centres; the bumpers only soften impact, so specify an external rod lock or pilot check valve if you must hold a load. Since this specific SKU has no internal magnet, it cannot host reed or solid-state sensors.
Quick checklist
At 0.5 MPa it pushes 402.2 N and pulls 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Air is supplied through a 1/4 inch port.
No, this specific SKU lacks an internal magnet and cannot accept CMSG, DMSG, or EMSG switches. You must select an -S variant for position sensing. It is a round-body mini cylinder with fixed TPU bumper pads, not an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.