
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X75SCMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial workloads within a compact footprint. The stainless-steel barrel and Ø12 mm piston rod shrug off mild corrosion, making it highly suitable for damp or washdown environments where painted steel alternatives degrade. It features a 1/4 inch air port and a CM round end rear cover. Equipped with fixed TPU bumper pads, the unit decelerates impact at stroke ends rather than providing an adjustable air cushion.
Because the full theoretical rating is rarely usable in dynamic service, you should plan for a safe working load of roughly 241 N. For vertical lifting tasks, the piston can manage about 20.5 kg with a standard 2:1 safety margin. The integrated -S piston magnet allows direct mounting of CMSG, DMSG or EMSG switches for position sensing. Order code MI32X75SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X75SCMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a heavy routing flap on a logistics conveyor belt, using the 402.2 N push force to redirect parcels reliably without bounce.
Opens and closes a large-bore fluid dispensing valve on a bottling line, relying on the stainless construction to withstand daily washdowns.
Deploys a 75 mm stroke stopper arm to halt loaded pallets at a packaging station, safely absorbing kinetic energy via the fixed TPU bumpers.
When sizing this 32 mm bore, stepping down to a 25 mm model reduces the 0.5 MPa push force to 245.3 N, while stepping up to a 40 mm bore increases it to 628.3 N. This 75 mm stroke sits well within the 500 mm maximum standard limit, keeping rod bending stress low. The CM round end cover offers a specific rear mounting and port orientation for your spatial constraints.
Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centred, as the bumper pads only soften the end of travel and act as neither a brake nor a lock. To suspend a load safely mid-stroke, incorporate an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
This 32 mm bore cylinder uses a 1/4 inch air port and an M10x1.25 male rod thread. At 0.5 MPa it provides 402.2 N of push force and 345.6 N of pull force. At 0.7 MPa, push increases to 563 N and pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet, allowing you to fit CMSG, DMSG or EMSG reed or electronic switches directly to the body. The CM designation specifies a round end rear cover, which dictates the rear mounting footprint and port orientation. Note that Ø32 is a non-ISO-6432 round-body size.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.