
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X125RT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 125mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks. The stainless-steel barrel and Ø16 mm piston rod resist mild corrosion, making it superior to painted alternatives in damp environments. It features a 1/4" air port and an R axial-in rear cover for straightforward plumbing. Fixed TPU bumper pads absorb the impact at stroke extremes, though they do not offer adjustable cushioning.
For practical sizing, plan for a safe working load of about 377 N, which is roughly 60 percent of the 0.5 MPa push rating. Alternatively, it can vertically lift around 32 kg when applying a two-to-one safety margin. Note that this specific SKU lacks a magnet, meaning it cannot support CMSG, DMSG, or EMSG position switches without upgrading to the -S variant. Order code MI40X125RT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X125RT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy metal blanks into a mechanical stamping press, utilizing the 628.3 N thrust to overcome insertion friction reliably.
Actuates a heavy-duty routing gate on a packaging conveyor, where the stainless build withstands occasional washdowns and debris.
Folds large corrugated carton flaps prior to sealing, easily handling the resistance of thick cardboard over the 125 mm travel.
When sizing this 40 mm bore, stepping down to the Ø32 model reduces the 0.5 MPa push force to 402.2 N, while there is no larger standard MI bore available for higher demands. Because this 125 mm stroke is well within the 500 mm maximum, side-load stress on the rod remains manageable, but always ensure rigid mounting using LB foot, FA flange, or TC trunnion brackets to prevent rod bending. The R back cover provides an axial port orientation to simplify hose routing.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the TPU bumpers only decelerate the end-of-stroke impact rather than locking the piston. If your application requires the load to be held securely in place during an air loss event, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This 40 mm bore cylinder uses a 1/4" air port and a M12x1.25 male rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, this specific SKU does not include a piston magnet, so CMSG, DMSG, or EMSG switches cannot detect its position. You must select the -S magnet variant for sensing capabilities. It also features fixed TPU bumper pads rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.