
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X150SUTCT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 150mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work in compact spaces. The stainless-steel barrel and Ø16 mm rod shrug off mild corrosion and washdown, outperforming painted alternatives in damp environments. It operates on a 1/4" port with an M12x1.25 male rod thread.
Plan for roughly 377 N of actual work at 0.5 MPa to maintain a safe margin, which translates to lifting about 32 kg vertically. Fixed TPU bumper pads absorb the impact at stroke ends to protect the mechanism. Because this SKU includes the -S magnet, you can mount CMSG, DMSG or EMSG switches for precise position detection. Order code MI40X150SUTCT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X150SUTCT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy cartons off a main packaging line using the 628.3 N thrust, with the TC trunnion absorbing side loads during the pivot.
Indexes loaded pallets into a wrapping station, leveraging the 32 kg vertical lift capacity to overcome initial friction.
Secures thick metal plates for a milling operation, using the U 90-degree cover to fit tight tooling spaces while providing 879.6 N at 0.7 MPa.
Sizing this 40 mm bore is straightforward when you need high force: dropping down to the Ø32 bore reduces the 0.5 MPa push thrust to 402.2 N, while the Ø40 is the largest available in this series, so moving beyond 628.3 N requires a different cylinder family entirely. The 150 mm stroke is well within the 500 mm maximum, keeping rod bending stress low.
The included TC trunnion and U 90-degree back cover provide flexible pivot mounting options. Remember that the fixed bumpers only decelerate the stroke end; if air pressure drops, the piston will drift. To hold a load securely during air loss, add an external rod lock or pilot-operated check valve.
Quick checklist
This double-acting cylinder uses a 1/4" port and an M12x1.25 male rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum of 128.1 kgf at 1.0 MPa.
No, the Ø40 bore exceeds the ISO 6432 standard dimensions and is strictly a round-body mini cylinder. It features fixed TPU bumper pads for stroke-end deceleration, not the adjustable air cushion found on the MIC variant. The -S magnet supports CMSG/DMSG/EMSG sensors.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.