
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X15CMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 15mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy compact automation tasks. The stainless-steel barrel and Ø16 mm piston rod shrug off mild corrosion and washdown, outperforming painted alternatives in damp environments. It features a 1/4" air port and a compact 15 mm stroke.
Because it lacks the -S suffix, this specific SKU cannot accept CMSG, DMSG or EMSG magnetic switches. Plan for roughly 377 N of actual work at 0.5 MPa to maintain a safe margin. The fixed TPU bumper pads absorb end-of-stroke impact, and the CM round end cover simplifies rear mounting orientation. Order code MI40X15CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X15CMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Generates 628.3 N of push at 0.5 MPa to secure heavy metal castings inside machining centers prior to milling operations.
Exerts reliable downward force for seating bearings or pins, safely lifting about 32 kg vertically with a 2:1 mechanical margin.
Pivots robust guide rails on packaging lines to redirect heavy product flow, utilizing the compact 15 mm stroke for rapid actuation.
As the largest bore in the MI family, the Ø40 offers maximum thrust with a 128.1 kgf theoretical ceiling at 1.0 MPa. If your application requires less force, stepping down to the Ø32 bore provides 402.2 N push at 0.5 MPa. For holding a load vertically, remember the piston drifts if air pressure drops; the bumper pads only decelerate the stroke end and act as neither a lock nor a brake. Specify an external pilot-operated check valve for suspended loads. To add position sensing, select the -S magnet variant instead of this non-magnet model.
Quick checklist
At 0.5 MPa it provides 628.3 N push and 527.8 N pull. At 0.7 MPa it provides 879.6 N push and 738.9 N pull. The theoretical maximum force is 128.1 kgf at 1.0 MPa. The air port size is 1/4".
No, this SKU lacks the internal magnet required for switches. You must purchase the -S variant to use CMSG, DMSG or EMSG sensors. Additionally, the fixed TPU bumper pads only decelerate the stroke end and do not function as an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.