
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X15SCMSDBT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 15mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks. The stainless-steel barrel and Ø16 mm rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. It features a 1/4" port and an M12x1.25 male rod thread.
With its built-in magnet, the unit supports CMSG, DMSG and EMSG switches for precise position detection. The riveted construction keeps the body compact, while fixed TPU bumper pads absorb end-of-stroke impacts. For practical sizing, plan for roughly 377 N of actual work at 0.5 MPa, or expect it to lift about 32 kg vertically with a 2:1 safety margin. Order code MI40X15SCMSDBT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X15SCMSDBT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the full 879.6 N push at 0.7 MPa to knock dense metal stampings off a press bed in automotive lines.
Shifts loaded pallets onto secondary packaging tracks using the SDB pivot-block to handle angular misalignment.
Holds injection molding tooling closed with a 32 kg vertical-lift equivalent, leveraging the compact 15 mm stroke.
Since Ø40 is the largest available bore in this series, there is no larger standard option for higher force demands; if 628.3 N at 0.5 MPa is excessive, step down to the Ø32 bore which provides 402.2 N. This specific SKU includes an SDB pivot-block and a CM round rear cover, offering flexible mounting for pivoting articulations. Because it carries the -S suffix, you can directly mount CMSG, DMSG or EMSG sensors.
The 15 mm stroke is very short, minimizing rod-bending side-load risks. Remember that venting the air supply causes the piston to drift freely; the TPU pads only decelerate the stroke end and do not function as a locking brake. To suspend a load safely during an air loss event, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa it provides 628.3 N push and 527.8 N pull. At 0.7 MPa it yields 879.6 N push and 738.9 N pull. The theoretical maximum force is 128.1 kgf at 1.0 MPa. The air port size is 1/4".
No, the piston will drift if air is lost or the valve is centered. The fixed TPU bumper pads only decelerate the stroke end and act as neither a lock nor a brake. You must use an external rod lock or pilot check valve to hold a load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.