
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X200SCMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 200mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work. The Ø40 bore operates on a 1/4" port with a 16 mm piston rod, while the 200 mm stroke falls well within the 500 mm standard limit. Its riveted stainless barrel and rod shrug off mild corrosion, making it highly suitable for damp food-processing or outdoor environments where painted steel fails. The built-in magnet (-S) directly supports CMSG, DMSG, and EMSG electronic or reed switches for precise end-of-stroke detection.
For real-world sizing, plan for a safe working load of about 377 N, which represents 60 percent of the 0.5 MPa push rating. Alternatively, you can expect it to lift roughly 32 kg vertically when applying a sensible 2:1 safety margin. The rear of the body uses a CM round end cover, and fixed TPU bumper pads absorb the impact at stroke extremes without offering adjustable cushioning. Order code MI40X200SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X200SCMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy cartons or metal bins off a main packaging line using its 628.3 N push force at 0.5 MPa.
Actuates stainless guide gates in damp vegetable processing stations, relying on the riveted stainless body to resist mild corrosion.
Shifts dense palletized components into a wrapping station, lifting parts up to 32 kg vertically with a 2:1 safety margin.
When sizing this 40 mm bore, stepping down to a Ø32 model reduces the 0.5 MPa push force to 402.2 N, while no larger standard MI bore exists above it. If your application requires holding a load vertically during an air loss or valve centering event, note that this standard cylinder will drift; the TPU bumpers only decelerate the stroke end and act purely as impact absorbers, never as a lock. You must integrate an external rod lock or a pilot-operated check valve for secure positioning. The CM round end cover provides a specific rear mounting and port orientation, and the -S magnet enables CMSG, DMSG, and EMSG sensors. At 200 mm of travel, ensure your mounting geometry minimizes side-loading to prevent premature rod-bending or seal wear.
Quick checklist
This double-acting cylinder uses a 1/4" port and generates 628.3 N push / 527.8 N pull at 0.5 MPa, and 879.6 N push / 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, it features fixed TPU bumper pads that decelerate the stroke end, not an adjustable air cushion (which requires the MIC variant). However, the -S magnet allows direct mounting of CMSG, DMSG, or EMSG switches for position sensing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.