verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X20CMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 20mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke20 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$59.57 $67.07Save 11% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT

Generating a substantial 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty short-stroke tasks. The stainless-steel barrel and Ø16 mm piston rod shrug off mild corrosion, making it superior to painted alternatives in damp washdown environments. It carries a 1/4" port and an M12x1.25 male rod thread.

Equipped with fixed TPU bumper pads to decelerate the stroke end, the compact riveted body features a CM round rear cover for straightforward port and mounting alignment. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For moving real masses, plan for about 377 N of usable work, which safely lifts roughly 32 kg vertically with a 2:1 margin. Order code MI40X20CMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke20 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×20Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT Is Used

precision_manufacturing

Short-Stroke Stamping

Applies the full 879.6 N push at 0.7 MPa for compactly pressing or crimping small metal components within a 20 mm travel.

conveyor_belt

Heavy Diverter Gate

Leverages the 32 kg safe vertical lift capacity to pivot heavy routing flaps on high-throughput packaging conveyors.

warehouse

Pallet Stop Block

Uses the robust Ø16 rod and fixed TPU bumpers to abruptly halt loaded pallets, absorbing the impact without internal damage.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT the Right Cylinder?

Sizing this 40 mm bore against its neighbours ensures you apply the right thrust without overspending. Dropping to the Ø32 bore lowers the push force to 402.2 N at 0.5 MPa, while the Ø40 is the largest available standard MI size, so upgrading further requires a different cylinder family entirely. The 20 mm stroke keeps the rod short and highly resistant to bending under high side loads.

Remember that venting the air or centering the valve causes the piston to drift, as the TPU bumpers only soften end impacts rather than locking the rod. To suspend a load safely, integrate an external rod lock or a pilot-operated check valve. If your cycle demands adjustable end-cushioning for high speeds, step up to the MIC variable-cushion variant.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT FAQ

At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa. The air port is 1/4" and the male rod thread is M12x1.25.

No, this specific SKU lacks the internal magnet, so CMSG, DMSG, or EMSG switches cannot be used. You would need the -S variant for position sensing. The unit also features a CM round rear cover and fixed TPU bumpers rather than an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20CMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI40X20CMT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.