
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X20RT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 20mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles heavy-duty actuation within a compact footprint. The 40 mm bore pairs a 16 mm piston rod with an M12x1.25 male thread, utilizing a 1/4" port to manage the substantial air volume required for its 879.6 N maximum push at 0.7 MPa. Its riveted stainless barrel and rod resist mild corrosion and washdown, offering a durability edge over painted alternatives in damp environments.
The rear R cover configures the air supply axially inline with the body, saving envelope space where side ports would clash. Fixed TPU bumper pads absorb the stroke-end impact for this short 20 mm travel. Plan for roughly 377 N of actual work at 0.5 MPa to maintain a safe margin, which equates to lifting about 32 kg vertically under a 2:1 safety factor. Note this specific SKU lacks the -S magnet, meaning CMSG, DMSG, or EMSG position switches cannot be mounted. Order code MI40X20RT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20RT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 628.3 N push force at 0.5 MPa to deform or stake small metal components securely within a tight 20 mm travel envelope.
Acts as a robust pneumatic stop in conveyor lines, leveraging the 40 mm bore and axial R rear port to halt heavy product carriers without protruding sideways.
Snips thick runner gates immediately upon mold opening, relying on the 16 mm rod and M12x1.25 thread to drive a heavy-duty cutter through rigid plastic.
Sizing around the 40 mm bore is straightforward at the top of the MI range, as there is no larger standard option. If the 628.3 N push at 0.5 MPa exceeds your requirement, step down to the 32 mm bore (402.2 N push) to save air and space. Because this is the largest available size, pushing beyond 879.6 N at 0.7 MPa requires migrating to a different cylinder family entirely. The short 20 mm stroke minimizes rod-bending side-load risks, making it highly rigid for pressing or gripping tasks.
Mounting hardware includes LB foot brackets, FA flanges, SDB pivot blocks, and TC trunnions, alongside CA, U, R, and CM back covers. Remember that a standard double-acting cylinder drifts when air is lost or the valve centers; the TPU bumpers only decelerate the stroke end and will not lock the load. For vertical or suspended loads, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa it provides 628.3 N push and 527.8 N pull. At 0.7 MPa it yields 879.6 N push and 738.9 N pull. The theoretical maximum force is 128.1 kgf at 1.0 MPa. This 40 mm bore cylinder uses a 1/4" air port.
No, this specific SKU does not include a magnet. You must select an MI40X20RT-S variant to use CMSG, DMSG, or EMSG magnetic switches. Additionally, the fixed TPU bumpers only decelerate the stroke end; they do not function as an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.