
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X20SCMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 20mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks with ease. The stainless-steel barrel and Ø16 rod shrug off mild corrosion, making it highly reliable in damp or washdown environments compared to painted alternatives. A built-in piston magnet (-S) allows seamless integration with CMSG, DMSG, or EMSG switches for precise end-of-stroke detection.
Designed with a 20 mm stroke, the riveted construction keeps the unit compact while fixed TPU bumper pads absorb impact energy at the stroke ends. Buyers can plan for a safe working load of roughly 377 N, which translates to lifting about 32 kg vertically with a 2:1 safety margin. The CM round end back cover and 1/4" air port ensure straightforward plumbing and rear mounting. Order code MI40X20SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X20SCMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Ideal for securing heavy steel plates in fabrication fixtures, utilizing the 628.3 N push force to lock parts firmly before welding or machining.
Drives small stamping or riveting heads downward in assembly lines, safely applying around 377 N of working force without damaging the mechanism.
Pushes loaded pallets or heavy cartons across conveyor belts in packaging zones, where the stainless build resists daily washdown moisture.
When sizing this 40 mm bore actuator, compare its 628.3 N push force at 0.5 MPa against the smaller Ø32 bore, which provides 402.2 N. As the largest available MI bore, stepping up beyond this requires exploring alternative series. The short 20 mm stroke minimizes rod-bending risks, but always ensure side loads are minimized.
Because this is a double-acting cylinder, it cannot hold a load if air pressure drops or the valve is centered; the piston will drift. For vertical applications requiring position holding, incorporate an external rod lock or a pilot-operated check valve. The -S magnet equips the unit for sensors, and the CM round end cover offers specific rear-mounting geometry.
Quick checklist
This 40 mm bore cylinder features a 1/4" air port and an M12x1.25 male rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, the piston will drift if air is lost; use an external rod lock or pilot check valve for holding. It uses fixed TPU bumper pads to decelerate at stroke ends, not an adjustable air cushion. The -S magnet allows CMSG/DMSG/EMSG sensors, and the CM round end cover defines the rear style.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.