
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X25SCMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 25mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks. The Ø40 mm bore operates with a 1/4 inch port and a 16 mm piston rod. Its stainless-steel barrel and rod resist mild corrosion, making it superior to painted alternatives in damp environments. The riveted construction keeps the body compact, while fixed TPU bumper pads absorb stroke-end impact.
Plan for a safe working load of about 377 N, which is roughly 60 percent of the 0.5 MPa push rating. This translates to lifting a 32 kg part vertically with a 2:1 safety margin. The CM round end back cover offers flexible mounting orientation. Because this SKU includes the -S magnet, it supports CMSG, DMSG, and EMSG switches for position sensing. Order code MI40X25SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X25SCMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 628.3 N push force to knock heavy stamped metal parts out of a die reliably on every cycle.
Swings a heavy-duty gate to reroute dense cartons on a high-speed packaging line without slowing down.
Acts as a robust end-of-line barrier to halt loaded pallets, utilizing the 32 kg vertical lift equivalent.
When sizing this 40 mm bore, compare it against the adjacent 32 mm option, which provides 402.2 N of push force at 0.5 MPa. If the 32 mm unit lacks power, this 40 mm model steps up the output significantly. As the largest available bore in the series, there is no larger standard size to escalate to. The short 25 mm stroke minimizes rod bending risks, but always verify side-load alignment.
Remember that the fixed TPU bumpers only decelerate the piston near the stroke end; they do not function as a brake. If your application must hold a vertical load when air pressure drops, the piston will drift. You should integrate an external rod lock or a pilot-operated check valve to secure the position safely.
Quick checklist
At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa. It uses a 1/4 inch air port and a 16 mm rod with an M12x1.25 male thread.
The -S suffix means it has a built-in magnet for CMSG, DMSG, and EMSG switches. As a 40 mm bore round-body mini cylinder, it exceeds the ISO 6432 mounting dimensions, which only apply to bores up to 25 mm. It features a CM round end cover for installation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.