
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X300RT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 300mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles demanding actuation tasks. The Ø40 bore operates via a 1/4" port and features an M12x1.25 male rod thread. An R back cover configures the air supply for axial-in routing, simplifying manifold plumbing on crowded machines. Built with a stainless-steel barrel and piston rod, the riveted construction resists mild corrosion and washdown better than painted alternatives.
Fixed TPU bumper pads absorb impact at the stroke ends, though they do not provide adjustable cushioning. Plan for a safe working load of roughly 377 N to ensure reliable operation, which translates to lifting about 32 kg vertically with a 2:1 safety margin. Because this SKU lacks a magnet, it cannot host CMSG, DMSG, or EMSG sensors; specify the -S variant if position feedback is required. Order code MI40X300RT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X300RT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy cartons off a main packaging line using the full 628.3 N thrust, with the axial R port keeping hoses neatly tucked along the conveyor frame.
Stops and indexes loaded pallets at a wrapping station, where the stainless steel rod shrugs off ambient humidity and washdown overspray.
Ejects formed metal parts from a press bed, relying on the fixed TPU bumpers to soften the 300 mm retraction stroke end impact.
When sizing this actuator, compare its 628.3 N push force at 0.5 MPa against the smaller Ø32 bore, which offers 402.2 N. If your application requires even more power, note that the Ø40 is the largest available MI series size, so higher forces would require a different cylinder family entirely. The 300 mm stroke is well within the 500 mm maximum standard limit, but at this length you should carefully manage side loads to prevent rod bending and premature seal wear.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered, as the TPU bumpers only decelerate the end-of-stroke impact without locking the piston. To suspend a load safely during an emergency stop, integrate an external pilot-operated check valve or a dedicated rod lock. Furthermore, this specific configuration omits the magnet, rendering it incompatible with reed or electronic switches.
Quick checklist
This 40 mm bore cylinder features a 1/4" port and an M12x1.25 male rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum of 128.1 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must order an MI40X300RT-S variant to enable magnetic position sensing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.