
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X350SRT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 350mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks. The stainless-steel barrel and Ø16 mm rod shrug off mild corrosion, making it highly suitable for damp washdown environments where painted steel alternatives degrade. A 1/4" port supplies air to drive the 350 mm stroke, while fixed TPU bumper pads absorb the impact at each stroke end.
For practical sizing, plan for a safe working load of roughly 377 N, which is about 60 percent of the 0.5 MPa push rating. This translates to lifting a 32 kg part vertically with a 2:1 safety margin. The built-in piston magnet allows direct mounting of CMSG, DMSG, or EMSG switches for precise end-of-stroke detection. Order code MI40X350SRT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X350SRT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Utilizes the 628.3 N thrust to push heavy timber pallets onto a secondary packaging line, with the stainless build resisting dusty warehouse moisture.
Pushes raw metal blanks into a hydraulic press, relying on the 350 mm stroke to clear the die area completely during retraction.
Moves fluid racks into testing stations, using the integrated magnet and CMSG switches to confirm precise positioning for automated probes.
When sizing this 40 mm bore actuator, compare it against the adjacent Ø32 option, which provides 402.2 N of push force at 0.5 MPa. If your application requires even greater thrust, note that the Ø40 is the largest available size in this series, offering a maximum theoretical output of 128.1 kgf at 1.0 MPa. The 350 mm stroke is well within the 500 mm maximum standard limit, though at this extended length you should carefully manage side loading to prevent rod bending and premature seal wear.
This SKU features an R back cover with an axial-in port orientation to simplify plumbing in tight spaces. Because it is a standard double-acting cylinder, the piston will drift if air pressure is lost or the valve is centered; the TPU bumpers only decelerate the stroke end and do not function as a brake. To suspend a load safely during an emergency stop, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
This 40 mm bore cylinder features a 1/4" air port. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, the piston will drift if air is lost or the directional valve is centered. The fixed TPU bumper pads only decelerate the stroke end and do not act as a locking brake. You must add an external rod lock or pilot check valve to hold a vertical load safely.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.