verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X400RT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 400mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke400 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$130.60 $138.10Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT

Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty linear motion across its 400 mm stroke. The stainless-steel barrel and Ø16 mm piston rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. It carries an R back cover, meaning the rear air supply connects via an axial-in port to keep hose routing inline with the body.

Because the bore is Ø40, it sits outside the ISO 6432 standard dimensions, operating purely as a robust riveted round-body actuator rather than a direct mini bracket size. For actual work planning, target a safe load of about 377 N, which equates to lifting roughly 32 kg vertically with a 2:1 safety margin. The 1/4" port feeds air efficiently to maintain speeds of 30-800 mm/s, while fixed TPU bumper pads absorb the impact at stroke ends. Order code MI40X400RT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke400 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT Is Used

conveyor_belt

Heavy Package Diverting

Uses the 628.3 N push force to deflect heavy cartons on a stainless-steel washdown conveyor line where axial rear porting keeps hoses safely inline.

vertical_align_bottom

Pneumatic Pressing Station

Applies up to 879.6 N at 0.7 MPa to seat bearings or stamp light components, relying on the fixed TPU bumpers to soften the end-of-stroke impact.

warehouse

Pallet Gate Actuation

Drives a 400 mm travel to open and close heavy access gates in damp storage environments, safely moving loads under 32 kg without position holding.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT the Right Cylinder?

Sizing this actuator requires looking both ways: stepping down to the Ø32 bore drops the 0.5 MPa push force to 402.2 N, while no larger MI series exists above Ø40 if you need more than the 879.6 N generated here at 0.7 MPa. The 400 mm stroke is substantial for this diameter, so ensure your mounting configuration—whether LB foot, FA flange, or TC trunnion—prevents rod side-loading and bending during the long travel. This specific SKU lacks the -S magnet, meaning it cannot accept CMSG, DMSG, or EMSG position switches; you would need the -S variant for electronic sensing.

Keep in mind that the fixed TPU bumpers only decelerate the piston near the stroke end; they do not function as an adjustable air cushion like the MIC variant. Furthermore, a standard double-acting cylinder drifts when air pressure is lost or the valve is centered. If your application must hold a load statically during an air failure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT FAQ

This 40 mm bore cylinder features a 1/4" air port and a Ø16 mm rod with an M12x1.25 male thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.

No, this specific SKU does not include the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG switches. You must select an MI40 model with the -S suffix for electronic sensing. The stainless build resists mild corrosion, but note that Ø40 is a non-ISO-6432 round-body size.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400RT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI40X400RT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.