
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X400SRT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 400mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering a robust 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty actuation with ease. The Ø40 bore features a 16 mm piston rod, a 1/4" air port, and an M12x1.25 male rod thread. Because it lacks ISO 6432 mounting dimensions at this bore size, it functions purely as a high-power stainless-steel mini cylinder rather than a standard interchange unit.
The stainless-steel barrel and rod naturally resist mild corrosion, giving it a distinct advantage in damp or washdown environments compared to painted alternatives. Fixed TPU bumper pads absorb the impact at the stroke ends, while the built-in magnet (-S) allows seamless integration with CMSG, DMSG, or EMSG switches. For practical sizing, plan for a safe working load of roughly 377 N, which means it can comfortably lift about 32 kg vertically with a 2:1 safety margin. Order code MI40X400SRT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X400SRT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy cartons across sorting lines using its 628.3 N push force, with the stainless build surviving damp packing areas.
Ejects dense formed parts from a press bed over 400 mm of travel, relying on the fixed TPU pads to soften the stroke end.
Opens and closes heavy access doors in food processing facilities, where the stainless rod and barrel resist mild corrosion.
When sizing this 400 mm stroke model, note that the next size down, the Ø32 bore, provides 402.2 N of push force at 0.5 MPa, making the Ø40 your clear choice when that extra thrust is required. As the largest available MI bore, there is no larger standard option in this family. The extended 400 mm travel demands careful attention to side loading; ensure your mounting configuration—whether using LB foot brackets, FA flanges, or the R axial-in rear cover—supports the rod rigidly to prevent bending. Additionally, if your application must maintain a vertical position during a pressure loss, be aware that the piston will drift; the TPU pads only decelerate the end of the stroke and do not act as a brake, so an external rod lock or pilot check valve is necessary for holding loads.
Quick checklist
This double-acting cylinder uses a 1/4" air port and generates 628.3 N push and 527.8 N pull at 0.5 MPa. At 0.7 MPa, it yields 879.6 N push and 738.9 N pull. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
The -S suffix indicates a built-in magnet, allowing you to mount CMSG, DMSG, or EMSG switches for position detection. It features fixed TPU bumper pads that decelerate the stroke end; it does not have an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.