
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X40UT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 40mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial actuation tasks within a compact footprint. The stainless-steel barrel and piston rod provide excellent mild corrosion and washdown resistance, outperforming painted alternatives in damp environments. Equipped with a 1/4" air port and a 90-degree U back cover, it integrates smoothly into tight machinery layouts.
Fixed TPU bumper pads absorb the impact at stroke extremes, decelerating the piston without the complexity of adjustable cushions. For practical sizing, plan for a safe working load of about 377 N, which equates to lifting roughly 32 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks a magnet, so it cannot support CMSG, DMSG or EMSG reed sensors without upgrading to the -S variant. Order code MI40X40UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X40UT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Secures thick steel plates during CNC milling operations, utilising the 628.3 N push force to maintain rigid holding without deflection.
Actuates a heavy diverter gate on a logistics sorting line, where the 90-degree U rear cover provides optimal mounting clearance for the pivot mechanism.
Pushes failed quality-control containers off a food processing conveyor, leveraging the stainless-steel construction to withstand frequent humid washdowns.
When sizing this 40 mm bore actuator, compare its 628.3 N push force at 0.5 MPa against the smaller Ø32 bore, which yields 402.2 N under the same pressure. As the largest available bore in the series, there is no larger standard AirTAC MI option to step up to if higher thrust is required. The 40 mm stroke keeps the rod short and highly resistant to bending under compression. Because this is a standard double-acting cylinder, the piston will drift if air pressure drops or the valve is centred; the bumpers only soften the end-of-stroke impact rather than locking the load. For vertical or suspended loads that must remain fixed during a loss of pressure, incorporate an external pilot-operated check valve or a dedicated rod lock.
Quick checklist
This 40 mm bore cylinder features a 1/4" air port and a 16 mm piston rod. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, because this specific SKU does not include the -S magnet option, it cannot support CMSG, DMSG or EMSG switches. You would need to select the -S variant for position sensing. Additionally, the fixed TPU bumper pads only decelerate the stroke end and do not act as an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.