verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke500 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$152.71 $160.21Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT

Delivering 628.3 N of push force at 0.5 MPa, this stainless-steel round-body mini cylinder handles heavy-duty linear motion across a 500 mm stroke. The Ø40 bore operates on a 1/4" port with a robust Ø16 piston rod, while the built-in magnet (-S) enables direct mounting of CMSG, DMSG or EMSG switches for position sensing. Its riveted stainless construction resists mild corrosion and washdown, outperforming painted alternatives in damp environments.

For practical sizing, plan for roughly 377 N of real work at 0.5 MPa to maintain a safe margin. This translates to lifting about 32 kg vertically, letting you match the actuator to actual part weights. The CM round end back cover provides a compact rear profile, and fixed TPU bumper pads absorb the impact at stroke extremes without needing manual adjustment. Order code MI40X500SCMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke500 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT Is Used

conveyor_belt

Heavy Carton Diversion

Pushes heavy corrugated cartons across a high-speed packaging conveyor using the full 628.3 N push force to overcome friction on steel rollers.

vertical_align_bottom

Vertical Parts Lowering

Lowers dense metal castings into an inspection bath, safely managing a 32 kg payload thanks to the stainless rod and built-in magnet for bottom confirmation.

factory

Washdown Gate Actuation

Opens and closes heavy access doors on a food processing line where the stainless barrel withstands daily high-pressure washdown without corroding.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT the Right Cylinder?

As the largest bore in the series, the MI40 sits at the top of the range with no larger standard size available. If your application requires less force, stepping down to the Ø32 bore drops the 0.5 MPa push force to 402.2 N, which may suit lighter loads while saving space. Because this 500 mm stroke is at the maximum standard limit, verify your guiding structure to prevent rod-bending side loads over such a long extension.

The included -S magnet supports electronic and reed sensors, but remember that a plain double-acting cylinder drifts if air pressure is lost or the valve is centered. The TPU bumpers only decelerate the stroke end; they do not lock the piston. To hold a load securely in a vertical lift, add an external rod lock or a pilot-operated check valve to the system.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT FAQ

This Ø40 mm cylinder features a 1/4" port and a Ø16 mm rod with an M12x1.25 male thread. The double-acting thrust is 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.

No, the base MI uses fixed TPU bumper pads to decelerate the stroke end rather than an adjustable air cushion (which requires the MIC variant). Additionally, the Ø40 bore exceeds the ISO 6432 standard dimensions, so it mounts as a standard round-body mini cylinder using foot or flange brackets rather than ISO clevises.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SCMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI40X500SCMT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.