verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X500SRT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 500mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke500 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$152.71 $160.21Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT

Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty linear motion across a 500 mm stroke. The stainless-steel barrel and Ø16 rod shrug off mild corrosion, making it highly suitable for damp washdown environments where painted steel or aluminium bodies degrade. A built-in piston magnet comes standard, enabling direct mounting of CMSG, DMSG, or EMSG switches for end-position detection. The R back cover features an axial-in port, simplifying rear plumbing in tight machinery layouts.

For practical sizing, plan for a safe working load of roughly 377 N, which represents about 60% of the 0.5 MPa push rating. In a vertical lift scenario, this translates to hoisting approximately 32 kg safely with a 2:1 margin. Fixed TPU bumper pads absorb the impact at both stroke ends to protect the mechanics, while the 1/4" air port supplies the volume needed for the larger 40 mm bore. Order code MI40X500SRT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke500 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT Is Used

conveyor_belt

Heavy Package Diversion

Pushes heavy cartons or totes across high-speed sorting conveyors using the full 628.3 N thrust at 0.5 MPa, with the stainless build surviving humid packing environments.

vertical_align_bottom

Pneumatic Press Platen

Drives a small pressing assembly downward over the 500 mm travel, relying on the fixed TPU bumper pads to decelerate the platen at the bottom of the stroke.

warehouse

Pallet Component Indexing

Shifts heavy palletized fixtures or sub-components into a machining cell, using the integrated -S magnet and DMSG sensors to confirm the fully extended position.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT the Right Cylinder?

As the largest bore in the MI series, the Ø40 sits at the top of the range with no larger standard size available. If your application requires less force, stepping down to the Ø32 bore drops the 0.5 MPa push output to 402.2 N while saving valuable space. Because this SKU features the -S magnet, it is immediately ready for CMSG, DMSG, or EMSG electronic and reed sensors without any modifications.

Keep in mind that a plain double-acting cylinder drifts if air pressure is lost or the control valve is centred, as the TPU bumpers only soften the stroke-end impact rather than locking the rod. To suspend a load safely during an emergency stop, integrate an external pilot-operated check valve or a dedicated rod lock. Additionally, spanning a 500 mm stroke on a Ø40 piston creates a long lever arm; ensure rigid front mounting and minimize side-loading to prevent premature rod bending or seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT FAQ

This 40 mm bore cylinder features a 1/4" air port and a Ø16 rod with an M12x1.25 male thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push and 738.9 N pull at 0.7 MPa, with a theoretical maximum of 128.1 kgf at 1.0 MPa.

No, the fixed TPU bumper pads only decelerate the piston near the stroke ends and do not act as a brake. If air is lost, the rod will drift; for vertical loads, you must use an external rod lock or a pilot-operated check valve to hold position safely.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X500SRT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI40X500SRT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.