
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X50CMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 50mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this stainless-steel round-body mini cylinder handles heavy-duty automation tasks. The riveted construction pairs a corrosion-resistant barrel and rod with a CM round end cover, making it well-suited for damp or washdown environments where painted bodies fail. Air extends and retracts the Ø16 mm rod through a 1/4" port.
Fixed TPU bumper pads absorb the impact at stroke ends, though they decelerate rather than act as a lock. Plan for a safe working load of about 377 N, which lets you lift roughly 32 kg vertically with a 2:1 margin. Because this SKU lacks a magnet, it cannot host CMSG, DMSG or EMSG sensors; specify an -S variant if you require position detection. Order code MI40X50CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X50CMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 628.3 N push force to knock heavy stamped metal panels out of a die reliably on every cycle.
Swings heavy timber pallets onto a secondary packaging line, utilizing the 50 mm stroke to clear the main conveyor path.
Shifts dense security roller gates in humid warehouse loading bays, relying on the stainless steel rod to resist mild corrosion.
When sizing this 40 mm bore, compare it against the Ø32 option, which supplies 402.2 N of push at 0.5 MPa, as the Ø40 represents the largest available frame in this series. If air pressure drops or the valve centers, the piston will drift, so fit an external rod lock or pilot-operated check valve to suspend loads safely. The CM round end cover dictates the rear mounting geometry, and you can utilize LB foot, FA flange, SDB pivot or TC trunnion brackets to secure the body. With a 50 mm stroke, side-load stress on the rod remains minimal, but always ensure the front clevis aligns squarely to prevent premature seal wear.
Quick checklist
At 0.5 MPa it provides 628.3 N push and 527.8 N pull. At 0.7 MPa it yields 879.6 N push and 738.9 N pull. The theoretical maximum force is 128.1 kgf at 1.0 MPa. The air port is 1/4" and the male rod thread is M12x1.25.
No, this specific SKU does not include a magnet, so CMSG, DMSG or EMSG switches will not function. You must select an -S variant for position sensing. It features a CM round end cover and fixed TPU bumper pads that decelerate the stroke end but do not lock the load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.