verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X60RT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke60 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$68.30 $75.80Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT

Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty tasks where smaller bores stall. The stainless-steel barrel and Ø16 mm rod shrug off mild corrosion and washdown, outlasting painted-steel alternatives in damp or outdoor settings. Fixed TPU bumper pads absorb the stroke-end impact to protect your machinery, while the compact 60 mm stroke keeps the overall footprint tight.

Because it lacks the -S magnet option, this specific SKU cannot host CMSG, DMSG or EMSG sensors. For sizing, plan for roughly 377 N of actual work at 0.5 MPa rather than the absolute maximum, which translates to safely lifting about 32 kg vertically against gravity. The rear R cover features an axial-in port orientation, simplifying plumbing in confined spaces. Order code MI40X60RT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke60 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT Is Used

conveyor_belt

Package Diverting Gate

Actuates heavy steel diverting arms on high-throughput logistics conveyors, using its 628.3 N push force to reliably pivot fully loaded pallets onto secondary sorting lines.

factory

Stamping Pin Press

Drives a short 60 mm stamping pin in an automated sheet-metal fabrication cell, where the fixed TPU bumpers absorb the repeated end-of-stroke impact without requiring manual adjustment.

vertical_align_bottom

Wooden Board Clamping

Secures dense wooden panels against a machining fence in a furniture manufacturing plant, taking advantage of the stainless steel construction to resist dusty, humid workshop environments.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT the Right Cylinder?

When sizing this 40 mm bore, compare it directly against its smaller neighbour: the Ø32 bore generates 402.2 N of push at 0.5 MPa, making this Ø40 unit the right upgrade if you need the full 628.3 N to overcome friction. Since Ø40 is the largest available in this series, moving beyond an 879.6 N push at 0.7 MPa requires stepping up to a different cylinder family entirely. The 60 mm stroke is well within standard limits, so rod bending is rarely a concern, but always ensure rigid mounting using LB foot, FA flange or TC trunnion brackets.

Remember that venting the air supply causes the piston to drift freely, as the TPU bumpers only decelerate the end of travel rather than locking the rod. To prevent a suspended 32 kg load from dropping under lost pressure, integrate an external pilot-operated check valve or a dedicated rod lock.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT FAQ

This 40 mm bore cylinder features a 1/4" air port and a male M12x1.25 rod thread. It generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push and 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.

This specific SKU lacks the internal magnet, so it cannot accept CMSG, DMSG or EMSG magnetic switches. To soften stroke-end impacts, it relies on fixed TPU bumper pads that decelerate the piston. Note that this is a non-adjustable bumper rather than an air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60RT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI40X60RT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.