
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X60SUT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 60mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks with ease. The stainless-steel barrel and rod shrug off mild corrosion, making it a superior choice over painted alternatives in damp or washdown environments. Because this is a 40 mm bore, it is a non-ISO-6432 size, yet its riveted construction keeps the body remarkably compact and light for its force class. The built-in magnet (-S) directly supports CMSG, DMSG, and EMSG position switches.
For practical sizing, plan for a safe working load of about 377 N, which is roughly 60% of the 0.5 MPa rating. In vertical lifting applications, this translates to hoisting a 32 kg part safely with a 2:1 margin. The 1/4" port feeds air to extend and retract the 16 mm rod, while fixed TPU bumper pads absorb the impact at each stroke end. The U-style back cover provides a 90-degree mounting and port orientation for tight machinery layouts. Order code MI40X60SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X60SUT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Clamps and feeds heavy sheet metal blanks into a mechanical press, utilizing the 628.3 N push force to secure parts against vibration during transfer.
Sweeps heavy cardboard cartons off a roller conveyor onto a pallet, where the 90-degree U cover and short 60 mm stroke fit neatly into the palletizer frame.
Drives the main filling valve on a liquid bottling line, relying on the stainless-steel rod to withstand daily washdowns and chemical spray.
If 628.3 N at 0.5 MPa is too much power, the next size down is the 32 mm bore, which provides 402.2 N of push force. Since 40 mm is the largest available bore in this series, moving heavier loads requires parallel mounting or a larger alternative entirely. The integrated magnet allows seamless fitting of CMSG, DMSG, or EMSG sensors, and the 90-degree U rear cover simplifies side-mounting in confined spaces.
Keep in mind that a standard double-acting cylinder drifts when air pressure drops or the valve is centered, as the TPU bumpers only decelerate the stroke end rather than locking the rod. To prevent a suspended 32 kg load from falling, install an external rod lock or a pilot-operated check valve. The 60 mm stroke is well below the 500 mm maximum, so rod bending and side-load risks are minimal even under fast 30-800 mm/s cycling.
Quick checklist
This 40 mm bore cylinder uses a 1/4" air port. At 0.5 MPa it pushes with 628.3 N and pulls with 527.8 N. At 0.7 MPa the push is 879.6 N and pull is 738.9 N. The theoretical maximum force at 1.0 MPa is 128.1 kgf.
No, the piston will drift if air is lost or the valve is centered. The fixed TPU bumper pads only decelerate the rod near the stroke end; they do not act as a brake. For vertical loads, you must add an external rod lock or a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.