
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X75RT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 75mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, the AirTAC MI40X75RT is a heavy-duty round-body mini cylinder built for demanding actuation. This double-acting actuator features a 40 mm bore, a 75 mm stroke, and a 1/4" air port. Its stainless-steel barrel and piston rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments. The riveted construction keeps the body compact, while fixed TPU bumper pads absorb the impact at stroke extremes.
For practical sizing, plan for a safe working load of about 377 N, which is roughly 60% of the 0.5 MPa push rating. In vertical lifting tasks, this translates to hoisting about 32 kg safely with a 2:1 margin. This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches. The R back cover design incorporates an axial-in port orientation to simplify plumbing in tight machinery layouts. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75RT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 628.3 N push force to knock stamped metal parts out of a die reliably on heavy machinery.
Pushes dense cartons across a transfer line, easily handling the 32 kg vertical-lift equivalent horizontally.
Acts as a robust pneumatic stop for loaded pallets, relying on the stainless build to survive industrial wear.
Choosing this 40 mm bore provides substantial thrust, stepping up from the 25 mm size that offers 245.3 N push at 0.5 MPa; since 40 mm is the largest available MI bore, moving beyond this capacity requires a different cylinder family. Because this is a standard 75 mm stroke, side-load and rod-bending stresses remain minimal, but ensure your mounting handles the 16 mm rod diameter. You can utilize LB foot, FA flange, SDB pivot, or TC trunnion brackets, alongside CA, U, R, or CM back covers, to fit your space.
Keep in mind that a plain double-acting cylinder like this will drift if air pressure drops or the valve is centered, as the TPU pads only decelerate the stroke end and do not function as a braking mechanism. If your application requires the load to be securely held in place during an air loss event, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This 40 mm bore cylinder features a 1/4" port and generates 628.3 N push / 527.8 N pull at 0.5 MPa, and 879.6 N push / 738.9 N pull at 0.7 MPa. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, meaning it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for magnetic sensing. It uses fixed TPU bumper pads for deceleration rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.