
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X75SCMT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 75mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering a robust 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles demanding actuation tasks. The stainless-steel barrel and Ø16 mm rod shrug off mild corrosion, making it highly suitable for damp washdown environments where painted steel bodies degrade. It features a CM round end cover and uses a 1/4 inch air port.
For practical sizing, plan for a safe working load of about 377 N, which equates to lifting roughly 32 kg vertically with a 2:1 safety margin. Fixed TPU bumper pads absorb stroke-end impact to protect the mechanism, and the built-in magnet (-S) allows seamless integration with CMSG, DMSG, or EMSG switches for position sensing. Order code MI40X75SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SCMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Leveraging its 32 kg vertical lift capacity to push heavier packaged goods or crates cleanly across transfer stations on a high-speed packaging line.
The stainless-steel construction withstands damp food-processing environments, reliably opening and closing process gates exposed to frequent cleaning cycles.
Provides the necessary 628.3 N push force to deflect heavier palletized components or dunnage into designated sorting chutes at distribution hubs.
When sizing this 40 mm bore actuator, compare it against the adjacent Ø32 bore, which provides 402.2 N of push at 0.5 MPa. Since Ø40 is the largest available in this series, moving beyond 628.3 N requires stepping up to a different cylinder family entirely. The 75 mm stroke is well within the 500 mm maximum standard, keeping the assembly compact.
Because this is a standard double-acting cylinder, the piston will drift if air pressure drops or the valve is centered, as the TPU bumpers only decelerate the stroke end rather than locking the rod. To suspend a load safely mid-stroke, incorporate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push increases to 879.6 N and the pull to 738.9 N, with a theoretical maximum of 128.1 kgf at 1.0 MPa. The air port size is 1/4 inch, and the male rod thread is M12x1.25.
No, the fixed TPU bumper pads only decelerate the piston near the stroke ends and do not function as a brake. If air is lost or the directional valve is centered, the rod will drift. To maintain a vertical position, you must add an external rod lock or a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.