verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X75SUT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 75mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ40 mm
  • Stroke75 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionFixed TPU bumper pads
$71.32 $78.82Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI40 stroke, mounting and version on one page All MI40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT

Generating up to 628.3 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty automation tasks with ease. The stainless-steel barrel and piston rod resist mild corrosion, making it highly suitable for damp washdown environments where painted steel alternatives would degrade. Its riveted construction keeps the unit compact, while fixed TPU bumper pads absorb impact energy at the stroke ends. Because this is a 40 mm bore, it exceeds the ISO 6432 mounting dimensions, operating purely as a robust round-body actuator.

Equipped with a U-type 90-degree rear cover and a 1/4 inch air port, the actuator offers flexible plumbing and pivot mounting. The built-in piston magnet (-S) directly supports CMSG, DMSG and EMSG reed or electronic switches for precise end-of-stroke detection. For practical sizing, plan for a safe working load of roughly 377 N, which equates to lifting about 32 kg vertically with a 2:1 safety margin. Order code MI40X75SUT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT
SeriesMI mini cylinder
Bore sizeØ40 mm
Stroke75 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N739 N
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT

MIround-body mini cylinder (double-acting).
40Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT Is Used

precision_manufacturing

Stamping Press Feed

Pushes heavy metal blanks into a mechanical press, utilizing the 628.3 N thrust at 0.5 MPa to overcome material friction.

conveyor_belt

Pallet Divertor

Acts as a heavy-duty lane diverter on a packaging line, using the U-type 90-degree rear cover to pivot and redirect loaded pallets.

warehouse

Vertical Gate Lift

Raises an access door weighing approximately 30 kg, staying safely within the 32 kg vertical lift capacity derived from the 0.5 MPa push force.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT the Right Cylinder?

When sizing this 75 mm stroke actuator, note that stepping down to a 32 mm bore reduces the push force to 402.2 N at 0.5 MPa, while no larger standard MI bore exists above 40 mm. If your application demands high kinetic energy at cycle completion, consider the MIC variable air cushion variant instead of this fixed bumper model. The 1/4 inch port and M12x1.25 male rod thread are fixed by the 40 mm bore.

Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centred; the TPU pads only decelerate the stroke end and do not function as a brake. To suspend a load safely during an emergency stop, integrate an external pilot-operated check valve or a dedicated rod lock. Additionally, keep the operating speed within 30-800 mm/s and ensure side loads are minimized to prevent rod bending over the 75 mm travel.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT FAQ

At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa. This 40 mm bore cylinder uses a 1/4 inch air port and a 16 mm piston rod.

Yes, the -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG or EMSG switches directly onto the body. This specific SKU features a U-type 90-degree back cover, which provides a pivot pin mount for articulated rod-end connections.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI40X75SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI40X75SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.