
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI40X80SRT is a genuine double acting round-body mini air cylinder with a Ø40mm bore and 80mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 628.3 N of push force at 0.5 MPa, the AirTAC MI40X80SRT is a robust double-acting round-body mini cylinder built for demanding automation. Its stainless-steel barrel and Ø16 mm rod shrug off mild corrosion, making it highly suitable for damp or washdown environments where painted steel alternatives degrade. The riveted construction maintains a compact profile while housing fixed TPU bumper pads that absorb stroke-end impacts. An 80 mm stroke provides substantial travel for moving heavy components.
Equipped with an R axial-in rear port and a 1/4 inch air connection, this unit integrates seamlessly into higher-flow pneumatic setups. Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG position switches for precise end-of-stroke detection. For practical sizing, plan for a safe working load of roughly 377 N, which translates to lifting about 32 kg vertically with a 2:1 safety margin. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI40X80SRT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø40 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | 739 N |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy metal blanks into a forming press, utilizing the 628.3 N thrust to overcome material friction and seat the part accurately.
Actuates a heavy-duty routing gate on a packaging line, where the stainless build withstands daily washdowns and the 80 mm stroke moves the guide fully clear.
Raises a loaded transfer flap on a logistics sorter, safely lifting approximately 32 kg cartons using the integrated magnet for confirm position feedback.
Selecting this Ø40 bore makes sense when the 245.3 N push of a Ø25 unit is insufficient, providing a massive jump in thrust without stepping up to a larger industrial profile body. If even greater force is required, note that 40 mm is the largest bore in the MI family, so exceeding this capacity means looking outside the mini-cylinder range entirely. The 80 mm stroke is well within the 500 mm maximum, keeping the assembly rigid. Remember that the fixed TPU bumpers only decelerate the piston near the end of travel; they do not function as a brake. If your application must hold a load vertically during a pressure drop or valve centering, you must add an external rod lock or pilot-operated check valve, as the piston will drift otherwise.
Quick checklist
This double-acting cylinder utilizes a 1/4 inch port and generates 628.3 N push and 527.8 N pull at 0.5 MPa. At 0.7 MPa, the push increases to 879.6 N and the pull to 738.9 N. The theoretical maximum force is 128.1 kgf at 1.0 MPa.
Yes, the -S designation means it has a built-in magnet for CMSG, DMSG, or EMSG switches. However, it does not hold position if air pressure is lost; the piston will drift, so an external rod lock or pilot check valve is required for load holding. The fixed TPU bumpers only soften the stroke end.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.