verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the MTAL series. You can still order this code here: we ship the direct replacement MTBL32X100CM, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).

AirTAC MTAL · Discontinued Single-Acting Mini Cylinder

Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM

The AirTAC MTAL Rear Single Acting Mini Cylinder MTAL32X100CM is a single acting, pull (spring extend) aluminum-barrel mini cylinder with a Ø32mm bore and 100mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the pull (work) stroke and the spring returns the rod — it rests extended on air loss. This model is discontinued; the direct replacement is the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM.

  • BoreØ32 mm
  • Stroke100 mm
  • Port sizeG1/8
  • Acting typeSingle acting, pull (spring extend)
  • Rod threadM10×1.25
  • StatusDiscontinued → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM
$37.44 $44.94Save 16% Ships as MTBL32X100CM (current AirTAC replacement)
Ships as MTBL32X100CM, the current AirTAC direct replacement (same bore, stroke, force, port and mounting). Order this code as usual. Your cart, checkout and order confirmation will show the MTBL32X100CM we ship. View MTBL32X100CM
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
verified Genuine AirTAC sync_alt Direct MTBL upgrade bolt Reply in 7 h

About the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM

The AirTAC MTAL32X100CM is a discontinued single-acting pull-type mini cylinder with a 32mm bore and 100mm stroke. It uses compressed air to retract the rod while an internal spring extends it, yielding a usable pull force of 261.2 N at 0.5 MPa. The direct replacement is the MTBL32X100CM, matching the bore, stroke, G1/8 port, and CM mounting.

This MTAL32X100CM SKU lacks the -S magnet option, meaning it cannot accept CS1-M or DS1-M position sensors. The MTBL upgrade switches to a riveted rolling-packed body and CMSG/DMSG/EMSG sensors. It features a fixed rubber bumper, a carbon-steel rod with hard chrome, and a CM round-end back cover. On air loss, the fail-safe home is extended.

Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM Technical Specifications

ModelAirtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM
SeriesMAL single-acting mini cylinder (discontinued)
ReplacementAIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM
Bore sizeØ32 mm
Stroke100 mm
Acting typeSingle acting, pull (spring extend)
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.2 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range50 – 800 mm/s
CushionFixed rubber bumper
Max standard strokeUp to 100 mm

Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM carries the same single-acting ratings.

Usable Pull Force (Ø32mm)

PressurePull force (net of spring)
0.5 MPa261.2 N
0.7 MPa399.4 N

Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.

Model Code: Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM

MTALSingle acting, pull (spring extend) aluminum-barrel mini cylinder (discontinued).
32Bore size in mm (20/25/32/40).
×100Stroke length in mm.
SOptional magnet for a CS1-M / DS1-M sensor (MTBL uses CMSG/DMSG/EMSG).
CA / U / CMBack cover: CA pivot, U flat-end or CM round-end.

Replacement: MTAL → MTBL. Related: MSAL/MSBL (single-acting push), MAL/MBL (double acting).

Where the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM Is Used

precision_manufacturing

Injection Mold Ejection

Pulls ejector pins back inside a 32mm mold base against 261.2 N force at 0.5 MPa, using the spring-extend fail-safe to safely park pins out of the mold cavity on air loss.

memory

PCB Router Clamp

Retracts a hold-down gate on a printed circuit board routing machine, relying on the 100mm stroke to clear the cutting spindle before the spring extends the guard.

sync_alt

Textile Tension Draw

Draws back a fabric tensioning lever in a textile loom, using the 399.4 N pull at 0.7 MPa to overcome mechanical drag while releasing tension when air is removed.

Replacing the Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM with AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM

To replace the MTAL32X100CM, use the MTBL32X100CM. Confirm the 32mm bore, 100mm stroke, G1/8 port, PT thread, CM round-end back cover, and the lack of a magnet. Remember the 0.2 MPa minimum operating pressure and never apply external load on the spring extend stroke, as the fail-safe home is extended.

At 100mm stroke, side-load and rod-bending risks are high; ensure rigid front mounting. To size either direction: stepping down to bore 25 yields 137.2 N pull at 0.5 MPa, while stepping up to bore 40 provides 439.4 N at 0.5 MPa.

Upgrade checklist

  • ✓ Order the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM (same bore/stroke/force)
  • ✓ Same pull direction and extended fail-safe home
  • ✓ Min 0.2 MPa; no external load on the spring return
  • ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
  • ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
View AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
  • check Apply no external load on the spring return stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are threaded — not for field disassembly.
  • check For new builds, specify the AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM instead of this discontinued model.

Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM FAQ

Yes, the MTAL32X100CM is discontinued. The direct replacement is the MTBL32X100CM, which matches the 32mm bore, 100mm stroke, G1/8 port, and CM mounting. The MTBL upgrades to a riveted body and CMSG/DMSG/EMSG sensors.

This single-acting pull cylinder provides a usable pull force of 261.2 N at 0.5 MPa and 399.4 N at 0.7 MPa, with a minimum operating pressure of 0.2 MPa. On air loss, the internal spring pushes the rod to the extended fail-safe home position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

sync_alt

Direct Upgrade

The AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM replaces this model 1:1.

local_shipping

Fast Dispatch

MTBL replacements are usually dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote (Airtac MTAL Rear Single Acting Mini Cylinder MTAL32X100CM → AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM)

Tell us the quantity and destination — we quote the direct AIRTACMTBLREARSINGLEACTINGMINICYLINDERMTBL32X100CM replacement with price, availability and lead time, usually within 7 hours.

Thank you. We received your request for MTAL32X100CM and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.