
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X100-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X100-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster.
Because the adjuster acts purely as a mechanical stop on the retract end, it does not hold the load without live air pressure. The extruded aluminum barrel includes dual sensor grooves for mounting CMSE reed or DMSE electronic switches, and the standard carbon steel piston rod handles everyday industrial loads reliably.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position during initial commissioning without machining new hard stops.
Quickly adjust the travel distance on a packaging line when switching to a different product size.
Set precise mechanical end-of-stroke limits for clamping or pressing tasks that require varying depths.
Choose this 50mm bore when you need more thrust than the 40mm version (628N at 0.5 MPa) but want a lighter footprint than the 63mm class. The 100mm adjustment range is ideal for product changeovers, letting you fine-tune the end position at commissioning without swapping the cylinder or adding external stops. If your process requires true load-holding without continuous air, consider the SAIL or BSAI series instead.
For ISO 15552 interchangeability, match the 50mm bore, 100mm stroke, PT tapered port thread, and the standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that SAIJ omits the FB, CA, CB, and CR mounts. Since the adjustment range equals the full stroke, you have complete flexibility over the travel distance within the 0-100mm window.
AirtacDistr lists every SAIJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-saij50-adjustable-cylinder
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to trim the effective stroke back from 100mm down to 0mm. This provides a 0-100mm usable travel window for fine-tuning end positions without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.