
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X100-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X100-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back a 100 mm nominal stroke by up to 40 mm. This creates a highly flexible 60-100 mm usable travel window, perfect for dialing in exact end positions during machine commissioning without swapping hardware.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR. The rear screw acts purely as a travel stop for deceleration and positioning, meaning it will not hold a load safely without continuous live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X100-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 60-100 mm travel window during setup to achieve precise end positions without machining custom spacers.
Quickly adjust the retract stop by up to 40 mm on a packaging line to accommodate different product sizes.
Dial in the exact push position for diverting items on a conveyor without changing out the entire actuator.
The adjustable stroke is ideal for product changeovers on a packaging line where end-of-stroke positions vary by up to 40 mm, eliminating the need to bolt on external stops or buy multiple fixed-stroke SAI cylinders. For any application requiring the cylinder to hold its position without live air, select a SAIL locking cylinder or an external rod lock instead of relying on the adjuster.
When replacing an ISO 15552 cylinder, verify the 50 mm bore, 100 mm nominal stroke, 40 mm adjustment range, PT tapered port thread, and the required mounting bracket. Since the standard carbon steel rod handles general loads well, ensure external guiding is used if side loads are present.
AirtacDistr lists every SAIJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-saij50-adjustable-cylinder
Quick checklist
If you step up to 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw lets you shorten the 100 mm nominal stroke by up to 40 mm, providing a usable travel window of 60 to 100 mm. It functions as a hard stop for end-position tuning and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.