
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X65-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X65-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By turning the rear adjustment screw, you can shorten the effective travel from its 65mm nominal length, creating a precise 45-65mm usable window for exact end-position tuning.
This built-in adjuster acts purely as a mechanical stop to set the retract position and relies on the integrated air cushions for end-of-stroke deceleration. It does not lock or hold the load without continuous air pressure. For position-holding requirements without live pressure, consider the related SAIL or BSAI series. The extruded aluminum barrel includes sensor grooves on both sides for adding CMSE reed or DMSE electronic switches.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45 to 65mm retract position during machine setup without physically replacing the cylinder or adding external stopper blocks.
Quickly adapt the stroke window on packaging or assembly equipment to accommodate slightly different product sizes on the same conveyor line.
Set precise clamping or holding positions where a fixed 65mm stroke might slightly overtravel and damage sensitive workpieces.
The adjustable 45-65mm travel window is ideal for machine setups requiring a variable end-stop during commissioning or product changeover, eliminating the need to swap out a fixed-stroke SAI cylinder or bolt on external stops. When matching ISO 15552 replacements, verify the 50mm bore, 65mm stroke, 20mm adjustment range, PT thread port, and the standard non-magnet configuration.
AirtacDistr lists every SAIJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-saij50-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 1374N.
The rear adjuster screw acts as a mechanical stop that lets you trim the effective stroke back by up to 20mm from the 65mm nominal length, providing a usable travel window of 45-65mm. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.