
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X75-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 75 mm nominal stroke that can be fine-tuned down by up to 20 mm, creating a precise 55-75 mm usable travel window.
This variant includes a magnet for position sensing and uses a standard carbon steel rod with a PT tapered port thread. The extruded aluminum barrel provides sensor grooves on both sides for flexible switch mounting. Because the rear adjuster acts purely as a mechanical stop, it decelerates the piston alongside the standard air cushions but does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-75 mm travel window during format size changes on packaging lines, avoiding the need to physically swap cylinders for different product lengths.
Fine-tune the retract position during machine commissioning to perfectly align a 982 N pressing or clamping operation without machining custom spacers.
Adjust the actuation length of a sorting gate on the fly, allowing the same cylinder to accommodate varying package widths on a conveyor system.
If your setup needs less force, stepping down to a 40 mm bore yields 628 N; if you require significantly more thrust, a 63 mm bore provides 1559 N. The adjustable stroke is chosen over a fixed SAI cylinder when machine formats change frequently, allowing you to dial in the 55-75 mm travel without adding external stops.
For a direct ISO 15552 replacement match, verify the 50 mm bore, 75 mm stroke, 20 mm adjustment range, PT port thread, and the -S magnet option. Remember that the rear adjuster is a travel stop, not a locking device. If your process requires true load-holding without continuous air pressure, consider an AirTAC SAIL or BSAI cylinder instead.
AirtacDistr lists every SAIJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-saij50-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 75 mm nominal stroke by up to 20 mm, providing a usable travel window of 55 to 75 mm. It works with the air cushion to set the end position but does not hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.