verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke75 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.83 $96.33Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S

The AirTAC SAIJ50X75-30-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches.

This model uses a carbon steel piston rod with an M16x1.5 thread and PT tapered ports. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke75 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S Is Used

tune

End-Stop Calibration

Fine-tune the retract distance within the 45 to 75 mm window during machine commissioning to achieve precise positioning without external stopper hardware.

settings_input_component

Product Changeover

Quickly adjust the effective stroke when switching between product sizes on a conveyor line, reducing setup downtime significantly.

factory

Assembly Positioning

Push and pull loads up to 982N at 0.5 MPa in automated assembly stations, using the rear screw to set the exact pressing depth.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S the Right Cylinder?

The 30mm adjustment range is ideal for product changeovers on a line, allowing you to reposition the end stop in seconds rather than swapping the cylinder for a fixed-stroke SAI. For load-holding without continuous air, use an SAIL or BSAI cylinder instead of relying on this adjuster.

With a 75mm stroke, side loads are minimal, but the rod thread and diameter still dictate how much lateral force the piston can handle. To replace this cylinder, match the 50mm bore, 75mm stroke, 30mm adjustment, PT ports, and the -S magnet requirement.

AirtacDistr lists every SAIJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-saij50-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S FAQ

The rear adjuster screw allows you to shorten the 75mm nominal stroke by up to 30mm, providing a usable travel window of 45 to 75mm. The adjuster is a mechanical stop, not a lock, so it cannot hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ50X75-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.