
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X75-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to shorten the effective travel. With a 75 mm nominal stroke and a 40 mm adjustment range, it provides a usable travel window of 35-75 mm for precise end-position tuning at commissioning.
This model uses a G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread, offering solid resistance to side loading. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE solid-state switches if a magnet is added later. The rear adjuster acts purely as a mechanical stop to set the retract end position and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 35-75 mm travel window during size changeovers on packaging lines without physically replacing the actuator.
Fine-tune the retract position during machine commissioning to achieve exact sensor triggering and part handoff.
Provide adjustable mid-stroke stops for pressing or locating components where the exact depth varies by batch.
Choose this 50 mm bore when your application requires more force than a 40 mm bore (628 N at 0.5 MPa) but does not need the bulk of a 63 mm cylinder (1559 N). The 40 mm adjustment range is ideal for machines that undergo frequent product changeovers, allowing you to dial in the exact 35-75 mm travel window without swapping the cylinder or adding external stops. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster is a stop, not a lock. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-saij50-adjustable-cylinder
Quick checklist
The rear adjusting screw lets you mechanically shorten the stroke by up to 40 mm. This creates a usable travel window of 35-75 mm, allowing precise end-position tuning without changing the cylinder.
It operates at speeds between 30 and 800 mm/s, driven by its G1/4 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.