
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X95-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X95-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits precise end-position tuning. It provides a usable travel window of 75 to 95 mm, allowing you to dial back the nominal 95 mm stroke by up to 20 mm without adding external stops.
This model features a carbon steel piston rod with an M16x1.5 thread, providing solid resistance to side loads, though unsupported travel still requires external guiding. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2. It uses PT tapered ports sized G1/4 and relies on adjustable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X95-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 75 to 95 mm end-position during commissioning without swapping cylinders or fabricating external stopper blocks.
Quickly adjust the retract stop to accommodate slightly different material lengths on a production line running multiple product sizes.
Fine-tune the clamping travel window to adapt to part tolerances, ensuring consistent clamping force without re-engineering the fixture.
If you need less force, the 40 mm bore offers 628 N; if you need more, stepping up to the 63 mm bore yields 1559 N. The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, serving as a commissioning tool rather than a fixed-length SAI cylinder.
For a direct ISO 15552 replacement, match the 50 mm bore, 95 mm stroke, 20 mm adjustment, G1/4 PT port, and your required mounting interface. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure. For load-holding without continuous air, consider the SAIL or BSAI series. Since the stroke is under 300 mm, standard guiding is typically sufficient for the M16x1.5 rod.
AirtacDistr lists every SAIJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-saij50-adjustable-cylinder
Quick checklist
The rear adjuster screw lets you shorten the nominal 95 mm stroke by up to 20 mm, creating a usable travel window of 75 to 95 mm. This stopper only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.