
The AirTAC SCJ100 Standard Cylinder SCJ100X75-40 is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 40 mm range without swapping the cylinder. Ø100mm bore, 75mm nominal stroke, PT1/2 ports and adjustable end cushioning.
The AirTAC SCJ100X75-40 is a double-acting, double-rod pneumatic cylinder engineered for applications requiring precise, field-adjustable stroke termination. Its rear-cap adjusting screw provides up to 40 mm of fine-tuning on the stroke end, allowing you to dial in the exact stopping position without swapping the cylinder or adding external hard stops.
The cylinder features a 25 mm diameter piston rod and PT1/2 ports for ample flow. An integrated air cushion, 29 mm in length, decelerates the piston smoothly at the end of travel, reducing noise and vibration. The body length A for this adjustable-stroke model is 245 mm, providing a robust yet compact footprint for its force class. It operates on filtered air from 0.15 to 1.0 MPa across a temperature range of -20 to +70 °C.
| Model | Airtac SCJ100 Standard Cylinder SCJ100X75-40 |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 75 mm |
| Stroke adjustment | Up to 40 mm (rear adjusting screw) |
| Acting type | Double acting (double rod) |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Nominal (maximum) stroke length in mm. |
| -40 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Ideal for integrators who need to precisely dial in the end-stop position during initial machine setup, accommodating real-world variations in tooling or fixtures.
Quickly adjust the stroke for different product sizes on packaging or material handling lines without mechanical modifications, reducing downtime between batches.
Take up slack from pad or gripper wear over time by simply turning the rear screw, maintaining consistent clamping force and part contact.
Select the SCJ100X75-40 when your application demands a powerful 100 mm bore cylinder with the ability to fine-tune the stroke end by up to 40 mm during commissioning or changeovers. For a simpler, fixed-stroke solution, consider the standard SC series. A direct replacement must match the 100 mm bore, 75 mm nominal stroke, 40 mm adjust range, and PT port thread. For strokes over 300 mm, evaluate side-load forces and consider an external guide or a guided cylinder to protect the rod from bending.
AirtacDistr lists every SCJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-scj100-adjustable-cylinder
Adjustable-stroke checklist
Maximum push force at 0.9 MPa is 7068 N.
A screw in the rear cap limits the piston's retraction, effectively shortening the stroke end by up to 40 mm from the nominal 75 mm. It does not adjust speed or output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.