
The AirTAC SCJ100 Standard Cylinder SCJ100X75-50 is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 50 mm range without swapping the cylinder. Ø100mm bore, 75mm nominal stroke, PT1/2 ports and adjustable end cushioning.
The SCJ100X75-50 is a double-acting, double-rod pneumatic cylinder with a 100 mm bore and a nominal 75 mm stroke. Its defining feature is the rear-cap adjusting screw, which provides a 50 mm field-adjustable range to fine-tune the stroke end position.
This tie-rod cylinder uses a 25 mm diameter piston rod and PT1/2 ports, with a 29 mm air cushion at each end for smooth deceleration. The SCJ body length (A dimension) is 245 mm, slightly longer than a fixed-stroke SC of the same bore to accommodate the adjustment mechanism. The standard operating pressure is 0.15–1.0 MPa, with a proof pressure of 1.5 MPa, and the speed range is 30–800 mm/s.
| Model | Airtac SCJ100 Standard Cylinder SCJ100X75-50 |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø100 mm |
| Nominal stroke | 75 mm |
| Stroke adjustment | Up to 50 mm (rear adjusting screw) |
| Acting type | Double acting (double rod) |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Nominal (maximum) stroke length in mm. |
| -50 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
During machine commissioning, the 50 mm adjustment range lets technicians fine-tune the actuator end position without disconnecting rod-end tooling or machining custom stops.
On packaging or assembly lines, operators can quickly adjust the stroke end to accommodate different product sizes or pallet dimensions, reducing downtime between batches.
In high-cycle clamping or pressing fixtures, the adjusting screw can be used to take up mechanical wear in the tooling over time, maintaining consistent clamp force and position.
Choose the SCJ100X75-50 when you need to dial in the exact stroke end during commissioning or changeover without swapping the cylinder. For applications needing a fixed, non-adjustable stroke, the standard SC100 series is a simpler, slightly shorter alternative. To replace this unit, match the 100 mm bore, 75 mm nominal stroke, 50 mm adjust range, PT port thread, and basic mounting style. For strokes of 300 mm or more, evaluate side-loading and consider an external guide or a guided cylinder to protect the rod and bearings.
AirtacDistr lists every SCJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-scj100-adjustable-cylinder
Adjustable-stroke checklist
The theoretical push force is 3927 N at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa. The pull force is slightly lower at 3681 N at 0.5 MPa due to the 25 mm rod reducing the effective piston area on the return stroke.
Yes, if you need the 50 mm stroke-end adjustability. The SCJ100X75-50 matches the SC100 mounting footprint and porting, but its body is longer (245 mm A-dimension). Ensure your machine has clearance for the rear adjustment screw and that the 75 mm nominal stroke plus 50 mm adjustment range meets your motion requirements.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.