The AirTAC SCJ200 Standard Cylinder SCJ200X75-75 is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 75 mm range without swapping the cylinder. Ø200mm bore, 75mm nominal stroke, PT3/4 ports and adjustable end cushioning.
The SCJ200X75-75 is a double-acting, double-rod pneumatic cylinder from AirTAC that provides a nominal 75 mm stroke with a 75 mm rear-end adjustment range, letting you fine-tune the stroke end position on the machine without swapping the cylinder.
This model features a 40 mm diameter piston rod, G3/4 port threads, and a 33 mm air cushion for smooth end-of-stroke deceleration. The body length A(SCJ) is 342 mm, providing a compact footprint for its force class. Operating on filtered air from 0.15 to 1.0 MPa, the SCJ200X75-75 is built with a durable tie-rod construction and TPU seals, rated for a standard temperature range of -20 to +70 °C.
| Model | Airtac SCJ200 Standard Cylinder SCJ200X75-75 |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder (ISO 6430 class) |
| Bore size | Ø200 mm |
| Nominal stroke | 75 mm |
| Stroke adjustment | Up to 75 mm (rear adjusting screw) |
| Acting type | Double acting (double rod) |
| Port size | PT3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×75 | Nominal (maximum) stroke length in mm. |
| -75 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
In a bearing or bushing press, the 75 mm adjustment screw allows operators to precisely set the final insertion depth for different part tolerances without changing tooling or adding external hard stops, ensuring consistent assembly quality.
On a heavy-duty conveyor line handling pallets or large packages, this cylinder can act as a retractable stop. The adjustable stroke lets you fine-tune the stop position for different product lengths, improving line flexibility during format changeovers.
For a large welding or gluing fixture, the SCJ200X75-75 can be used as a clamp. The adjustable stroke compensates for wear on the clamping pad or variations in workpiece thickness over time, maintaining a consistent clamping point without reprogramming the machine.
If your application requires a different force envelope, stepping down to a 160 mm bore reduces push force to 10053 N at 0.5 MPa, while the 250 mm bore increases it to 24544 N. For applications where the stroke is fixed and never needs adjustment, the standard SC200X75 fixed-stroke cylinder is a simpler, more cost-effective alternative.
This is a direct replacement for any AirTAC SCJ200 cylinder with a 75 mm nominal stroke and a 75 mm adjustment range, using PT ports and basic mounting. For strokes of 300 mm or more, be mindful of side-loading on the 40 mm rod; if the load is not perfectly guided, consider adding an external guide rail or switching to a guided cylinder to prevent rod bending and premature seal wear.
AirtacDistr lists every SCJ200 order code with its price on one page at https://airtacdistr.com/products/airtac-scj200-adjustable-cylinder
Adjustable-stroke checklist
The cylinder is double-acting with a double rod, so push and pull forces differ. At 0.5 MPa, the push force is 15708 N and the pull force is 15080 N. At the maximum operating pressure of 1.0 MPa, the theoretical push force reaches 31416 N. Always design your circuit based on the available air pressure and required force.
A rear-cap adjusting screw lets you shorten the stroke end by up to 75 mm from its nominal 75 mm maximum. This is ideal for fine-tuning the piston's stop position during setup or when product dimensions change. If your application has a fixed, unchanging stroke, the standard SC200 fixed-stroke cylinder is a better choice, as it is simpler and more economical. The SCJ is the right pick when you need that field-adjustability.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.