The AirTAC SCJ80 Standard Cylinder SCJ80X35-30 is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 30 mm range without swapping the cylinder. Ø80mm bore, 35mm nominal stroke, PT3/8 ports and adjustable end cushioning.
The SCJ80X35-30 brings 80 mm bore force into a compact, field-tunable package.
This double-rod double-acting cylinder uses a 25 mm rod, PT3/8 ports and an M20x1.5 rod thread. The 28 mm air cushion decelerates the piston smoothly, and the tie-rod body length (A dimension) is 239 mm. Operating pressure spans 0.15–1.0 MPa, with a proof pressure of 1.5 MPa.
| Model | Airtac SCJ80 Standard Cylinder SCJ80X35-30 |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 35 mm |
| Stroke adjustment | Up to 30 mm (rear adjusting screw) |
| Acting type | Double acting (double rod) |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Nominal (maximum) stroke length in mm. |
| -30 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
During machine bring-up, use the 30 mm rear screw to creep the stroke end into perfect alignment with mating tooling, eliminating the need to shim or re-drill mounting brackets.
In high-cycle clamping or pressing stations, gradually advance the stroke end via the adjusting screw to compensate for pad or jaw wear, maintaining consistent clamping force without changing the cylinder.
On packaging lines handling multiple box sizes, operators can quickly reset the pusher stroke end by turning the rear screw, slashing changeover time compared to swapping fixed-stroke cylinders.
If your application never needs stroke adjustment, the fixed-stroke SC80 series saves cost and lead time. For a direct replacement, match an SCJ80 with the same nominal stroke, 30 mm adjust range, PT3/8 ports, basic mounting and no magnet.
At 35 mm stroke, rod bending from side load is rarely a concern, but always centre the load on the rod axis and avoid direct radial forces to maximise seal and bearing life.
AirtacDistr lists every SCJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-scj80-adjustable-cylinder
Adjustable-stroke checklist
At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. Because it is a double-rod cylinder, push force is always greater than pull force.
Only if the mounting and port positions allow the extra rear length for the adjusting screw. The SCJ body is slightly longer than a comparable SC. Match bore (80 mm), port thread (PT3/8), rod thread (M20x1.5) and mounting style. The SCJ adds 30 mm of stroke-end adjustability that the SC lacks.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.