verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SCJ Series · Adjustable-Stroke Cylinder

Airtac SCJ80 Standard Cylinder SCJ80X40-30

The AirTAC SCJ80 Standard Cylinder SCJ80X40-30 is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 30 mm range without swapping the cylinder. Ø80mm bore, 40mm nominal stroke, PT3/8 ports and adjustable end cushioning.

  • BoreØ80 mm
  • Nominal stroke40 mm
  • Stroke adjust-30 mm
  • Port sizePT3/8
  • Rod threadM20×1.5
  • CushionAdjustable, 28 mm
$100.92 $108.42Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SCJ80 stroke, mounting and version on one page All SCJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SCJ80 Standard Cylinder SCJ80X40-30

Its rear-cap adjusting screw provides up to 30 mm of stroke-end retraction, allowing machine builders to dial in the exact stopping position during commissioning or changeovers without modifying the cylinder mount.

This 80 mm bore tie-rod cylinder uses a 25 mm diameter piston rod and PT3/8 pneumatic ports. The integrated air cushion, with a 28 mm cushion length, decelerates the piston smoothly, and the body length A(SCJ) is 239 mm. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N.

Airtac SCJ80 Standard Cylinder SCJ80X40-30 Technical Specifications

ModelAirtac SCJ80 Standard Cylinder SCJ80X40-30
SeriesSCJ adjustable-stroke tie-rod cylinder
Bore sizeØ80 mm
Nominal stroke40 mm
Stroke adjustmentUp to 30 mm (rear adjusting screw)
Acting typeDouble acting (double rod)
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 28 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.

Model Code: Airtac SCJ80 Standard Cylinder SCJ80X40-30

SCJAdjustable-stroke tie-rod cylinder series.
80Bore size in mm.
×40Nominal (maximum) stroke length in mm.
-30Adjustable-stroke range in mm (options 10/20/30/40/50/75/100).
-SOptional built-in magnet for sensor position sensing.

Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SCJ80 Standard Cylinder SCJ80X40-30 Is Used

tune

Commissioning Fine-Tuning

During machine setup, the 30 mm adjustment screw lets technicians precisely set the stroke end for a perfect fit with mating tooling, eliminating the need for shims or custom spacers.

conveyor_belt

Product Format Changeover

On packaging lines, operators can quickly adjust the cylinder stroke to accommodate different box or pallet sizes by turning the rear screw, reducing downtime between production runs.

engineering

Wear Compensation

In high-cycle clamping fixtures, the adjustable stroke can be extended slightly over time to compensate for pad or workpiece wear, maintaining consistent clamping force without replacing parts.

Is the Airtac SCJ80 Standard Cylinder SCJ80X40-30 the Right Cylinder?

Choose the SCJ80X40-30 when you need a robust, field-adjustable end-stop within a 30 mm window. For applications needing a longer fixed stroke without adjustment, the standard SC80 fixed-stroke cylinder is a simpler alternative. A direct replacement must match the 80 mm bore, 40 mm nominal stroke, 30 mm adjust range, PT3/8 ports, and basic mounting style.

AirtacDistr lists every SCJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-scj80-adjustable-cylinder

Adjustable-stroke checklist

  • ✓ Need to fine-tune stroke on the line?
  • ✓ Nominal stroke + adjust range (-30)
  • ✓ Required force at your working pressure
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the rear adjusting screw, then lock it before running.
  • check Adjust end cushion screws for smooth stops.
  • check Use SCJ mounting accessory (FA / LB / TC / TCM1).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SCJ80 Standard Cylinder SCJ80X40-30 FAQ

The push force is 2513 N at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa. The pull force is lower at 2268 N at 0.5 MPa because the 25 mm rod reduces the effective piston area on the return stroke.

The rear-cap screw mechanically limits the piston's stroke end within a 30 mm range from the nominal 40 mm stroke. It is designed for fine-tuning the end position, not for absorbing high-impact loads. For applications with high kinetic energy, an external shock absorber or hard stop is still recommended.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SCJ Adjustable-Stroke Cylinders

Request a Quote for Airtac SCJ80 Standard Cylinder SCJ80X40-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SCJ80X40-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.