The AirTAC SCJ80 Standard Cylinder SCJ80X60-75 is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 75 mm range without swapping the cylinder. Ø80mm bore, 60mm nominal stroke, PT3/8 ports and adjustable end cushioning.
The SCJ80X60-75 is an 80 mm bore, double-acting, double-rod pneumatic cylinder with a field-adjustable stroke end. Its rear-cap adjusting screw provides a 75 mm range to shorten the nominal 60 mm stroke, giving machine builders a quick way to fine-tune the end position during commissioning or format changes without swapping the cylinder.
This tie-rod cylinder has a body length A of 239 mm and an adjustable air cushion to decelerate the piston smoothly. The operating temperature range is -20 to +70 °C with the standard TPU seal. The stroke-adjust screw only sets the mechanical stroke end; it does not alter the cylinder's force output or speed. For position sensing, a magnet-equipped variant (-S suffix) is available to accept CMSG/DMSG sensors.
| Model | Airtac SCJ80 Standard Cylinder SCJ80X60-75 |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 60 mm |
| Stroke adjustment | Up to 75 mm (rear adjusting screw) |
| Acting type | Double acting (double rod) |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Nominal (maximum) stroke length in mm. |
| -75 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 75 mm rear adjuster lets technicians dial in the exact stroke end position on a new machine without cutting brackets or adding external hard stops, speeding up factory acceptance testing.
On a packaging line running multiple box sizes, the adjustable stroke allows operators to quickly reset the pusher stroke end for a new format, minimizing downtime between batches.
In clamping or pressing fixtures, the stroke can be extended slightly over time to compensate for tooling wear or pad compression, maintaining consistent clamp force without replacing the cylinder.
If your force requirement is lower, stepping down to a 63 mm bore reduces push force to 1559 N at 0.5 MPa; for higher force, the 100 mm bore provides 3927 N. The 75 mm adjustment range on this model is ideal for applications where the exact end position is unknown at the design stage or needs to be changed periodically.
A fixed-stroke SC80 cylinder is a simpler, lower-cost choice if the stroke never needs adjustment. This SCJ80X60-75 is a direct replacement for another AirTAC SCJ80 cylinder with a 60 mm nominal stroke, 75 mm adjust range, PT ports, and basic mounting. For strokes of 300 mm or more, evaluate the side load on the 25 mm rod and consider adding an external guide or switching to a guided cylinder to prevent rod bending.
AirtacDistr lists every SCJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-scj80-adjustable-cylinder
Adjustable-stroke checklist
At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N.
It can replace a fixed-stroke cylinder of the same 80 mm bore if you need the 75 mm stroke-end adjustment feature and the 60 mm nominal stroke is sufficient. You must match the port thread (PT), mounting style, and ensure the slightly longer body length A of 239 mm fits your machine. If you need a simple direct for a fixed-stroke SC80, the standard SC series is a more direct match.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.