The AirTAC SCJ80 Standard Cylinder SCJ80X75-20FA is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 20 mm range without swapping the cylinder. Ø80mm bore, 75mm nominal stroke, PT3/8 ports and adjustable end cushioning.
The SCJ80X75-20FA is a double-acting, double-rod pneumatic cylinder with a field-adjustable stroke end. Its rear-cap adjusting screw provides up to 20 mm of stroke shortening, allowing fine-tuning of the piston's end position without swapping the cylinder.
This model features an FA front rectangular flange for direct panel or end-face mounting (bracket code F-SC80FA). The 25 mm diameter piston rod and PT3/8 ports ensure robust flow and mechanical strength. The cylinder body length A(SCJ) is 239 mm, and it includes an adjustable air cushion to decelerate the piston smoothly at the end of its travel.
| Model | Airtac SCJ80 Standard Cylinder SCJ80X75-20FA |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 75 mm |
| Stroke adjustment | Up to 20 mm (rear adjusting screw) |
| Acting type | Double acting (double rod) |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Nominal (maximum) stroke length in mm. |
| -20 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 20 mm adjustment screw lets technicians fine-tune the end-stop position during initial machine setup, compensating for assembly tolerances without needing to modify the cylinder or add external hard stops.
In packaging or labeling machinery, the stroke can be quickly adjusted to accommodate different product sizes or box heights, reducing changeover time between production runs.
In pressing or clamping applications, the adjustable stroke end can be used to take up mechanical wear on tooling or contact surfaces over time, maintaining consistent clamping pressure without replacing parts.
The 20 mm adjustable stroke range is ideal for commissioning trials where the final stop position needs to be dialled in on the machine. If your stroke length is fixed and will never need adjustment, a standard SC80X75 cylinder is a simpler alternative.
For a direct replacement, match the SCJ80 bore, 75 mm nominal stroke, 20 mm adjust range, FA front flange mount, and PT port thread. The front flange mounting is designed for rigid, perpendicular mounting to a machine panel. For strokes of this length, ensure the load is guided to prevent excessive side-loading and rod bending; if side forces are present, consider an external guide rail or a guided cylinder.
AirtacDistr lists every SCJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-scj80-adjustable-cylinder
Adjustable-stroke checklist
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N.
You can replace a fixed-stroke SC80 with this SCJ80X75-20FA only if you need the adjustable stroke feature and the 75 mm nominal stroke with a 20 mm adjustment range matches your requirements. The SCJ body is slightly longer to accommodate the adjusting screw. Ensure your mounting interface matches the FA front flange and the port thread is PT. If you need a direct dimensional direct for a fixed-stroke SC, the SC series is the correct match.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.