The AirTAC SCJ80 Standard Cylinder SCJ80X80-40 is a genuine double-acting DOUBLE-ROD air cylinder whose rear rod carries the stroke ADJUSTER: the stroke end is field-adjustable within a 40 mm range without swapping the cylinder. Ø80mm bore, 80mm nominal stroke, PT3/8 ports and adjustable end cushioning.
The SCJ80X80-40 is an 80 mm bore double-acting, double-rod pneumatic cylinder with a rear-cap adjusting screw that lets you shorten the stroke end by up to 40 mm in the field. The 25 mm rod and PT3/8 ports handle demanding linear tasks, and the 28 mm air cushion decelerates the piston smoothly at end of travel.
Because the effective stroke is adjustable, you can dial in the exact stopping position during commissioning, format changeovers, or after mechanical wear without replacing the cylinder or adding external hard stops. The body length A(SCJ) is 239 mm, slightly longer than a fixed-stroke SC of the same bore. This unit is basic-mounted with TPU seals and PT threads, ready to bolt into standard tie-rod footprints.
| Model | Airtac SCJ80 Standard Cylinder SCJ80X80-40 |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 80 mm |
| Stroke adjustment | Up to 40 mm (rear adjusting screw) |
| Acting type | Double acting (double rod) |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The adjuster on the rear rod sets the stroke end position. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SC push of the same bore. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Nominal (maximum) stroke length in mm. |
| -40 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
A packaging machine uses the 40 mm adjustment range to precisely set the insertion depth of a pusher plate. Operators tweak the rear screw during product changeovers without stopping the line for a cylinder swap.
In a woodworking clamp, the adjustable stroke compensates for pad wear over thousands of cycles.
A conveyor diverter uses the SCJ80X80-40 to control the gate angle. The 40 mm screw adjustment allows the maintenance team to fine-tune the gate’s end position for different parcel sizes, with the 28 mm cushion absorbing the kinetic energy at the end of each stroke.
If a fixed stroke is acceptable and you want a shorter overall length, the standard SC80 series is a lighter, simpler alternative. For guided loads where side forces are present, pair the cylinder with an external guide rail or switch to a guided cylinder; the SCJ itself is not designed to absorb lateral loads.
When replacing an existing unit, match an AirTAC SCJ adjustable-stroke cylinder with the same 80 mm bore, 80 mm nominal stroke, 40 mm adjustment range, PT3/8 ports, and basic mounting. The F-SC80TC centre trunnion or F-SC80LB foot bracket can be added if the mounting style changes.
AirtacDistr lists every SCJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-scj80-adjustable-cylinder
Adjustable-stroke checklist
The push force is 2513 N at 0.5 MPa, 3518 N at 0.7 MPa, and 4523 N at the maximum operating pressure of 0.9 MPa. The pull force is lower because of the single 25 mm rod: 2268 N at 0.5 MPa. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes, if you need the 40 mm field-adjustable stroke range. The SCJ body is slightly longer (239 mm A-length) to house the adjusting screw. Ensure the port size (PT3/8), mounting style, and magnet option match your current setup. If you do not need adjustability, the standard SC80 is a more compact, cost-effective choice.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.