
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-40S is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X35-40S is a compact double-acting, double-rod cylinder featuring a 12 mm bore and a 35 mm stroke. An external M5x0.8 R-thread adjuster screw lets you dial the extend stop anywhere from 0 to 35 mm directly on the machine, saving axial mounting depth where round-body alternatives will not fit.
This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, with a 6 mm rod and M5x0.8 port.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X35-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
The short riveted body fits tight multi-axis grids, allowing operators to re-adjust the mechanical stop rapidly when switching between product families.
Choose this model when trial positioning or frequent changeover requires on-site stroke tuning without swapping parts.
Confirm the 12 mm bore, 35 mm stroke, 40 mm adjust window, M5x0.8 port, female M3x0.5 rod thread, and the -S magnet for your envelope. Note that a plain cylinder does not hold its load on air loss or valve centering; the piston drifts and the bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ12 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj12-adjustable-cylinder
Quick checklist
The theoretical maximum push is 12 kgf at 1.0 MPa.
The M5x0.8 R screw shortens the extend stop by up to 40 mm, yielding a usable extend range of 0 to 35 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.