
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-10B is a genuine double-acting COMPACT cylinder (Ø12mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ12X40-10B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 30 and 40 mm directly on the machine, saving axial mounting depth where larger profile bodies cannot fit.
This specific SKU includes a male M5x0.8 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ12X40-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø12 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | — |
| Max (@1.0 MPa) | 9 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 12 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 30-40 mm extend stop on small machining fixtures to perfectly seat delicate workpieces without over-clamping.
Adjust the forward travel by up to 10 mm during testing sequences to safely probe samples at varying depths before committing to a fixed length.
When sizing this 12 mm bore, evaluate both neighbors. Stepping down is not an option as this is the smallest available SDAJ bore, but stepping up to the SDAJ16 increases the 0.5 MPa push force to 100.5 N for heavier mechanisms. Choose this 12 mm model for light-duty trial positioning where you need to tune the extend stroke on-site without swapping shims or parts.
Confirm your parameters: 12 mm bore, 40 mm maximum stroke, 10 mm adjust window, M5x0.8 air port, and a male M5x0.8 rod thread. Note that a plain cylinder does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ12 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj12-adjustable-cylinder
Quick checklist
An M5x0.8 adjuster screw shortens the extend stroke by up to 10 mm, yielding a usable 30-40 mm forward range while retract remains full. This SKU features a male M5x0.8 rod thread (the default is female M3x0.5) and lacks a piston magnet, so it cannot support sensing switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.