
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X30-30B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 R screw lets you dial the outward stroke down by up to 30mm directly on the machine, yielding a usable extend range of 0 to 30mm without swapping shims or parts.
This variant uses a male M5x0.8 piston rod thread rather than the default female M3x0.5. The short riveted body drastically cuts axial mounting depth where a larger profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the piston near the end of travel; it is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X30-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for prototype assembly stations where the outward reach must be fine-tuned on the fly within the 0-30mm window to strike a part without crushing it.
Handles varying box sizes on a packaging line by adjusting the male M5x0.8 rod extension to tuck flaps precisely before taping.
Choose this unit when your assembly requires frequent on-site stroke tuning or trial positioning.
Verify your parameters: 16mm bore, 30mm maximum stroke, 30mm adjustment window, and an M5x0.8 air port. This SKU includes the -B male M5x0.8 rod thread but no -S magnet. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers—the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The M5x0.8 adjuster screw mechanically limits the extend stroke between 0 and 30mm. It does not alter the output force. The cylinder cannot hold a load on air loss; use an external rod lock or pilot-operated check valve for position holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.