
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-30 is a compact double-acting double-rod cylinder featuring an external M5x0.8 R screw that dials the extend stop from 10 to 40 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth where round-body or profile cylinders cannot fit. End shock is managed by a fixed NBR bumper that decelerates the piston near the stroke end; it is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot accept magnetic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 40 mm to set precise probe contact pressure on small electronic test fixtures without machining new spacers.
Fine-tune the grip extension for delicate sample handling, ensuring the fixed NBR bumper safely decelerates the mechanism at the end of travel.
Choose this specific configuration when you need frequent on-site stroke tuning between 10 and 40 mm without changing parts. It uses an M5x0.8 port and a female M3x0.5 rod-end thread. Remember that a plain cylinder does not hold a load on air loss or valve centering; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
It operates at 30-500 mm/s within a 0.15-1.0 MPa pressure range.
Turning the external M5x0.8 R screw shortens the extend stroke by up to 30 mm, giving a usable range of 10 to 40 mm. The screw functions strictly as a mechanical stop and does not alter the output force. This specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.