
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-30B is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M5x0.8 adjuster screw lets you dial the outward stroke anywhere between 10 and 40 mm, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves axial mounting depth where round-body alternatives will not fit. It uses a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. This specific SKU includes a male M5x0.8 piston rod thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches without switching to an -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the outward reach on the fly during product changeovers, using the male M5 rod end to attach specialized tooling securely.
The short riveted body fits tight vertical frames, while the external M5x0.8 screw allows researchers to set precise 10-40 mm travel limits for delicate sampling.
When sizing this 16 mm bore, verify your thrust requirements both ways. Dropping to an SDAJ12 reduces the 0.5 MPa push to 56.5 N, whereas stepping up to an SDAJ20 increases it to 157.1 N.
This model suits operators needing frequent on-machine stroke tuning for trial positioning. Confirm the 16 mm bore, 40 mm maximum stroke, 30 mm window, M5x0.8 port, and male M5 rod thread fit your assembly. Remember that a plain cylinder drifts and does not hold a load if air pressure drops or the valve centres; install an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
Turning the M5x0.8 adjuster screw mechanically shortens the extend stop from the 40 mm maximum down to 10 mm. It sets the end position without altering force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.