verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke40 mm
  • Adjustable range10–40 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$34.86 $42.36Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S

The AirTAC SDAJ16X40-30S is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position between 10 and 40 mm directly on the machine, avoiding part swaps during changeovers.

Its short riveted body minimizes axial mounting depth where round-body or profile units will not fit. The bore uses a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. Equipped with a built-in magnet, this unit supports AirTAC reed or electronic solid-state switches for end-of-stroke sensing.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke40 mm
Adjustable range10 – 40 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×40Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S Is Used

conveyor_belt

Changeover Diverter

Quickly reset the forward stop for different package sizes on a packing line without swapping out the entire actuator body.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S the Right Cylinder?

When sizing this 16 mm bore, evaluate your force needs both ways. Choose it when your setup requires frequent on-machine stroke tuning between 10 and 40 mm.

Verify the bore, 40 mm maximum stroke, 30 mm window, and M5x0.8 port. This specific SKU includes the S magnet for sensing and a female M3x0.5 rod-end thread. Remember that a plain cylinder does not hold position if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

The R M5x0.8 screw shortens the extend stroke by up to 30 mm, allowing a usable forward range of 10-40 mm; retract remains full. The built-in S magnet works with AirTAC reed or electronic solid-state switches to confirm end positions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-30S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ16X40-30S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.