
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-40S is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 0 to 40 mm directly on your equipment. Retract travel stays full length.
Its short riveted body drastically cuts axial mounting depth where round-body or profile units will not fit. The unit relies on a fixed NBR bumper to decelerate at stroke ends, and the -S option provides a built-in piston magnet for AirTAC reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 0 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 40 mm on packaging feeders to dial in the exact product push distance during format changeovers.
Use the M5x0.8 adjuster to find the optimal 100.5 N contact position during prototype assembly station setup without machining new spacers.
Leverage the built-in magnet with electronic switches to verify the 5.1 kg vertical lift position in compact lab automation rigs.
Stepping down to the SDAJ12 yields 56.5 N, while moving up to the SDAJ20 provides 157.1 N.
This model suits setups requiring frequent on-machine stroke tuning without part swaps. Remember that a plain cylinder does not hold a load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your 16 mm bore, 40 mm stroke, 40 mm window, M5x0.8 port, -S magnet, and female M3x0.5 rod-end thread.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 R screw mechanically shortens the extend stop up to 40 mm without changing the force. The -S suffix means a built-in piston magnet is included for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.