verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke5 mm
  • Adjustable range0–5 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$23.23 $30.73Save 24% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B

The AirTAC SDAJ16X5-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward end-position down to 0 mm from the nominal 5 mm maximum directly at the machine, eliminating shims or part swaps during commissioning.

This thin riveted-body design saves valuable axial mounting depth where round-body or larger profile units will not fit. The bore uses an M5x0.8 air port and a male M5x0.8 piston rod (-B option). End shock is managed by a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet, meaning it cannot host reed or electronic switches.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke5 mm
Adjustable range0 – 5 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×5Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B Is Used

precision_manufacturing

Probe Contact Setup

Dial the male M5 rod outward in tiny increments to set precise testing probe pressure on small PCBs without swapping physical spacers.

straighten

Micro-Clamp Positioning

Adjust the 0-5 mm extend stop on the fly to accommodate delicate material thicknesses in a compact clamping station.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B the Right Cylinder?

Choose this unit if your fixture requires on-site stroke tuning between 0 and 5 mm.

Confirm your parameters: 16 mm bore, 5 mm stroke, 10 mm adjustment window, M5x0.8 port, male M5x0.8 rod thread, and no magnet. Remember that a plain SDAJ does not hold a load if air pressure drops or the valve centres; the piston will drift. For suspended loads, integrate an external rod lock or pilot-operated check valve, as the fixed NBR bumper only decelerates near the stroke end.

AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–5 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B FAQ

Turning the R (M5x0.8) screw shortens the extend end-position by up to 10 mm. Since the nominal stroke is 5 mm, you can mechanically dial the outward stop anywhere between 0 mm and 5 mm. The retract stroke remains full length.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ16X5-10B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.