
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X50-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M5x0.8 adjuster screw lets you dial the outward stroke anywhere between 40 and 50 mm directly on your equipment, avoiding part swaps during setup.
Built with a short riveted body, this unit saves axial mounting depth where space is tight. It relies on a fixed NBR bumper to absorb end-of-stroke shock rather than an adjustable air cushion. The included piston magnet supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 50 mm |
| Adjustable range | 40 – 50 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the stroke by up to 10 mm on the packaging line to accommodate varying box heights, ensuring the rod folds flaps cleanly without overtravel.
Adjust the outward reach precisely during changeovers to trigger a reed or electronic switch at the exact fluid dispense height.
Dropping to an SDAJ12 reduces output to 56.5 N, while stepping up to an SDAJ20 raises it to 157.1 N.
Choose this model if your fixture requires on-site stroke tuning across a 40 to 50 mm window. It features a 6 mm rod, an M5x0.8 port, a female M3x0.5 rod-end thread, and the -S magnet. Remember that a plain cylinder drifts if air is lost or the valve centers; the fixed bumper only decelerates the end stroke and does not lock. For secure load holding without live pressure, add an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 R screw mechanically shortens the extend end-position from the 50 mm maximum down to 40 mm without altering force. The built-in -S magnet works with AirTAC reed or electronic switches to confirm position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.